Interlogix TruPortal Bedienungsanleitung PDF herunterladen (Seite 43)

TruPortal Software User Guide 31

Configuring Devices

Note: The Tamper option controls the tamper input point only, not the Door Contact, Request

to Exit, or Aux Input points. Also, this option will not appear on the System

Administration > Devices page if a door is connected to an IPSDC, which does not

support reader tamper input.

Aux Input

Note: This field will not appear on the System Administration > Devices page if a door is

connected to an IPSDC, which does not support auxiliary input/output types. Refer to

the IP-based Single Door Controller Quick Reference to learn about modifying jumper

settings for input types.

None

Indicates the input is not used and not monitored.

Extended RTE

Intended for use only with the Door Opener option selected for Aux Relay.

Mag Lock Bond Sense

Intended for doors that use a magnetic lock instead of a door strike. This detects the output from

the magnetic lock indicating the door has bonded to the magnet. The System will not activate the

magnet until the door bond sensor sends a signal indicating the door has made contact with the

magnet and the door contact sensor indicates the door is closed. This prevents the magnet from

activating prematurely and causing the door to slam closed.

If “Timed Unlock” is selected for Door Strike Mode, then the magnet will remain inactive until

that time has expired. However, it will still not activate until the magnetic bond sensor and door

contact sensor signals are received indicating the door is closed and bonded to the magnet.

Aux Relay

Note: This field will not appear on the System Administration > Devices page if a door is

connected to an IPSDC, which does not support auxiliary input/output types. Refer to

the IP-Based Single Door Controller Quick Reference to learn about modifying jumper

settings for input types.

None

Indicates the relay is not used and not energized.

Door Held/Forced

A typical use for this option is to have the relay trigger some physical alarm, such as a siren or

light, whenever the door is held or forced open.

Door Opener

Typically used with a door configured with a single reader for entry and a manual release wired

for RTE, and a push button for an Extended RTE automatic opener. The RTE input unlocks the

door for the duration that the manual release is active so that someone can exit normally. The

Aux input (Extended RTE) activates the Aux Relay for the specified Aux Relay On Time. This

relay output activates a door opener that automatically unlocks and opens the door for a person

needing assistance.

This setting only makes sense if Aux Input is configured for Extended RTE.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 137 138

Keine Kommentare

Interlogix TruPortal Bedienungsanleitung Seite 43