Interlogix TruPortal Bedienungsanleitung PDF herunterladen (Seite 34)

Configuring the System

22 TruPortal Software User Guide

Configuring Devices

This section describes how to configure the following devices:

• System Controller

• Inputs and outputs

• Door controllers

• Doors

• Readers

• Input/output expansion modules

To learn about configuring DVRs/NVRs and cameras, see Configuring Video Devices on page 33.

Before You Begin

Before configuring devices on the System Administration > Devices page, complete the following

steps:

1. If IPSDCs are installed, they must be configured to recognize the IP address of the System

Controller before configuring the IPSDCs in the User Interface. Establishing this network

connection ensures that each IPSDC will be detected when the System Controller scans for

hardware changes. See Configuring IP-Based Single Door Controllers on page 106.

2. Use the [Scan for Hardware Changes] button to discover devices, as described next.

3. (Optional, but recommended) Replace generic device names. See Assign Meaningful Names to

Hardware on page 23.

Scan for Hardware Changes

Before configuring devices, click the [Scan for Hardware Changes] button on the System

Administration > Devices page to discover the following types of proprietary devices located

downstream from the System Controller and add them to the Device Tree automatically:

• Dual door interface modules

• Input/output expansion modules

• IPSDCs that have already been configured to recognize the System Controller

Another way to add door controllers on the Devices page is to select the System Controller and then

click [Add]. Select the type of controller being added, fill out the remaining fields, and click [Accept

Changes].

The System will assign generic, default names to the devices that can be customized later (see Assign

Meaningful Names to Hardware on page 23) and display devices in a tree hierarchy on the System

Administration > Devices page. Some default names are sequential (e.g., Input11, Input12, etc.).

Doors and readers inherit the serial number of their parent door controller. For example, if a door

controller has the serial number 1234, the doors located downstream of the door controller will be

named Door 1234-1, Door 1234-2, etc.

Note: If the serial number of a door controller changes (for example, if a door controller is

replaced), all child objects (doors and readers) that still use default names should be

updated to reflect the new serial number of the parent door controller. See Replace a

Door Controller on page 25.

To detect hardware devices in the System:

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 137 138

Keine Kommentare

Interlogix TruPortal Bedienungsanleitung Seite 34