Interlogix TruVision IP Camera Configuration Manual Bedienungsanleitung PDF herunterladen (Seite 29)

2BChapter 3: Camera configuration

TruVision IP Camera Configuration Manual 25

To set up motion detection:

1. In the Configuration > Events folder, click the Motion Detection tab to

open its window.

2. Check the Enable Motion Detection box. Check Enable dynamic analysis

for motion if you want to see where has motion real-time.

Note: Deselect the “Enable Motion Detection” option to disable the motion

detection alarm.

3. Click Draw Area. Click and drag the mouse on the live video image to draw

an area sensitive to motion detection.

Note: You can draw up to 8 motion detection areas on the same image.

4. Click Stop Drawing to finish drawing. Click Clear All to delete all areas

marked and restart drawing.

5. Move the Sensitivity slider to set the sensitivity of the detection. All areas will

have the same sensitivity level.

6. Click Edit to edit the arming schedule. See the picture below for the editing

interface of the arming schedule.

7. Choose the day and click to set the detailed time period. You can copy

the schedule to other days.

8. Click OK to save changes.

9. Specify the linkage method when an event occurs. Check one or more

response methods for the system when a motion detection alarm is triggered.

Notify

Alarm Host Send an exception or alarm signal to remote management

software when an event occurs.

Send

Email Sends an email to a specified address when there is a motion

detection alarm.

Upload Snapshot

Capture the image when an alarm is triggered and upload the

picture to NAS or FTP server.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 53 54

Keine Kommentare

Interlogix TruVision IP Camera Configuration Manual Bedienungsanleitung Seite 29