Interlogix AP450 Bedienungsanleitung PDF herunterladen (Seite 4)

Operation information

The relay contacts will open and the LED will turn on (if

enabled) every time an alarm occurs. The unit should be

allowed to settle for at least one minute after power-up before

walk testing. When walk testing, walk across the curtains, not

directly toward or away from the unit.

4 AP450 Motion Sensors Installation Instructions

Maintaining the sensor

When installed and used properly, the unit provides years of

service with minimum maintenance. To ensure proper

operation, you should walk test the unit annually.

Clean the inside of the unit with a soft bristled brush or

compressed air. Clean the outside with a damp (water) cloth as

needed to keep it free of dust and dirt. Always test the unit

after cleaning.

Figure 9: Dimensions

2.8"

71mm

2.0"

51mm

4.0"

102mm

Specifications

Input voltage 9 to 15VDC (12V nom.)

Peak to peak ripple 2V max at 12VDC

Current consumption 15mA max.

Mounting height 6' to 10' (1.8m to 3m)

Target speed range 0.7' to 13.0' (0.2m to 4.0m)/sec.

Relay rating w/10

ohms in series

50mA at 28VDC

Alarm time 2.5 sec. min.

Tamper switch rating 100mA at 28VDC

Operating temperature 0° to 131° F (-18° to 55° C)

Relative humidity 93% max. non-condensing

Weight 4.25 ounce (120 g)

Dimensions:

Width

Depth

Height

2.8" (71mm)

2.0" (51mm)

4.0" (102mm)

Number of curtains 9

View angle 89°

Detection range 50' (15.2m) max.

Regulatory information

Listings C-UL US

Ordering information

Model # Loop type Electrical

configuration

Comments

AP450A Closed Normally

Closed

Form A

AP450 Open or Closed Normally

Closed or

Normally Open

(SPDT)

Form C

w/tamper

The unit shall be connected to a UL Listed power supply or control unit

capable of providing a minimum of 4 hours standby power. The

equipment shall be installed in accordance with NFPA 70. The unit

shall be tested at least once a year.

Contact information

www.utcfireandsecurity.com or www.interlogix.com

For customer support, see www.interlogix.com/customer-

support

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Interlogix AP450 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Interlogix AP450