Interlogix 5600 Series Bedienungsanleitung PDF herunterladen

ShatterPoint Glassbreak Sensor

Mounting

Description

The 5600 Glassbreak Sensors are designed to detect

breaking glass caused by forced entry into a protected

window or door. The ‘Tru-Dual’ transducer design provides

excellent false-alarm immunity in noisy environments.

The 5600 Sensors process both acoustic and vibration

information to identify breaking windows. Frame mounting

the 5600 Sensors eliminates detection concerns with drapes

and blinds. The built-in reed switch models provide

protection against forced opening of windows or doors, as

well as breaking glass.

Note These sensors may not consistently detect

cracks, bullets, or similar breaks. Glassbreak sensors

should always be backed up by interior protection such

as a motion detector.

Figure 1a. Frame Mounting

The 5600 sensors are designed to mount either inside the

frame (see Figure 1a) or on the facing (see Figure 1b). Refer

to Figure 3 for recommended mounting locations and

coverage range. The mounting location should provide good

mechanical coupling from glass to sensor and an

unobstructed microphone view of the glass. If structural

integrity of the frame is poor, temporarily mount the sensor

and follow the steps in Testing for range testing. Do not

exceed the tested range of the sensor.

Note For applications with more than one framed

window, use multiple 5600s or a ShatterPro II.

Use the screws provided to mount the sensor securely to the

frame. A loosely mounted sensor will not perform correctly.

The small cover screw must be used to permanently attach

the cover (see Figure 2).

ShatterPoint

™

Glassbreak Sensor

Models

5600-W, 5605-W, 5620-W, 5625-W

Installation Instructions

Figure 1b. Facing Mounting

Figure 2. Mounting and Cover Screws

Cover Screw

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Glassbreak Sensor

1ShatterPoint Glassbreak SensorMounting DescriptionThe 5600 Glassbreak Sensors are designed to detectbreaking glass caused by forced entry into a prot

Seite 2 - 3/4"

2ShatterPoint Glassbreak SensorFigure 7. Output Circuit (shown powered)Reed Switch ModelsModels 5620 and 5625 require the magnet be mounted onthe movi

Seite 3 - Testing

3ShatterPoint Glassbreak SensorRange Rap Glass Out of Range Out of Within Within RangeTest Range RangeAlarm Rap Glass & No Alarm No Alarm No Alarm

Seite 4 - Ordering Information

Voltage .................. 9 – 16V DCCurrent............ 12mA typ