Interlogix Monitor XL Advanced Installation Guide Bedienungsanleitung PDF herunterladen (Seite 10)

4 Monitor xL™ Advanced Installation Guide

21-3602E rev1.5

S00104 Keypad Selections

(left to right on keypad screen) Example:

Default Name Selections Description

00 Confirmed Alarm Time

Out

Time table codes.

(UK ACPO = 18)

Maximum Number of

Alarms per Point

Arming State

0 = All, 1 = 1, 2 = 2, 3 = 3 Primarily for

European Users.

(UK ACPO = 3)

Menu Navigation 0 = Standard, 1 = Ok-SOFT-3, 2 = Ok-

SOFT-1, 3 = future.

LCD Menu Style 0 = Standard, 1 = Ok-SOFT-3, 2 = Ok-

SOFT-1, 3 = future.

Unconfirmed Reset

Mode

0 = None, 1 = Follow Confirm Alarm, 2 =

Include Master, 3 = future.

 (no)

Confirm Reset Service

(yes) □ (no)

(UK ACPO = yes)

 (no)

Confirm Reset Master

(yes) □ (no)

 (no)

Confirm Reset

Challenged PIN.

(yes) □ (no)

 (no)

Confirm Reset using

Remote

(yes) □ (no)

S00105 Keypad Selections (left to right on keypad screen)

Default Name Selections Description

01100

Reference

Voltage

–

Main panel electrical mains operation.

E.g. 01100 = 110.0 Decivolts

(UK ACPO = 02200)

070

Battery

Size

Amp hours X 10

E.g. display as 7.0

(UK ACPO = 17.0)

AC Sync

0=60 Hz, 1=50 Hz, 2=No sync required,

3=DC supply

Synchronization with AC line to maximize internal clock

accuracy. With an unstable AC source, select "2: AC-

No Sync" ('AC failure' will be reported if the frequency

drops below 12.5 Hz). With a DC source, be sure to

disable E003 (AC Trouble) under "Equipment

Settings".

DC supply option will not detect power failure condition

and will not have a time base sync

(UK ACPO = 1)

Brownout

Mode

0=None, 1=Local alarm, 2=Alarm+report,

3=Report only

S00106 Keypad Selections (left to right on keypad screen)

Default Name Selections Description

001

VBUS Panel Output Base

See: Main Panel Output

Examples: next

What number the outputs that will be used on

the main controller’s VBUS connection will

start at.

001

Paging Output Base

See: Main Panel Output

Examples: next

What number the outputs that will be used on

the paging system will start at.

Also see S005:08, 09

001

Output Base for:

World Wide Modem with 8 output STU

REDCARE interface or 8 output STU

REDCARE interface

STU = Subscriber Terminal Unit

See: Main Panel Output

Examples: next

What number the outputs that will be used

with the main control board output plug in

boards will start at.

(UK ACPO = 003)

00·

·    ·

Save S00104

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Interlogix Monitor XL Advanced Installation Guide Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schalttafel Interlogix Monitor XL Advanced Installation Guide