Interlogix Topaz User Manual Bedienungsanleitung PDF herunterladen (Seite 100)

100

101

Topaz

User Manual

The Relay Control page contains the following information:

How to control or change the status of a Relay Point

1. To control or change the status of a Relay Point, scroll through the list of Relays in the lower

portion of the window under Control.

2. Click the name of the Relay to control.

3. Once the name is selected (highlighted), click the desired function, Energize, De-energize, or

Pulse.

After clicking one of the above, a message “Operation Complete” displays. If the ACU

controller is not communicating with the PC, then the message “Device Offline” displays.

4. Click OK to continue.

Status The top portion of the window under Status lists all pre-configured relays.

To check the status of a Relay, scroll through the Status List in the upper portion of the

window. The color of the name shows its status as follows:

Green De-energized

Red Energized

(Not shown) Pulse Output

Magenta Offline

Control To control or change the status of a Relay Point, scroll through the list of Relay Output

Points.

Relay Output Point Click the name of the Relay to control.

Energize Output This command activates or turns ON the relay until another command is sent by the

operator, time schedule, or linked condition, to change the relay to another condition.

De-energize Output This command de-activates or turns OFF the relay until another command is sent by the

operator, time schedule, or linked condition, to change the relay to another state.

Pulse Output This command activates or turns ON the relay. The relay remains activated or ON for less

than one second and then de-activates.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 419 420

Kommentare zu diesen Handbüchern

Keine Kommentare

Interlogix Topaz User Manual Bedienungsanleitung Seite 100

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Interlogix Topaz User Manual