Interlogix ShatterPro 3 Bedienungsanleitung PDF herunterladen (Seite 1)

ShatterPro 3 Glassbreak Detector

ShatterPro 3

Glassbreak Detector

Installation Instructions

Description

The ShatterPro 3 is an acoustic glassbreak detector designed

to detect breaking glass from framed windows in the perimeter

of a building. The detector is mounted in the building interior

and uses a power supply from a 12VDC control panel. The

detector is available in either a low-profile round housing or a

rectangular housing that connects easily to a single-gang box.

Features

The detector provides the following features:

• Range up to 25 feet (7.6 m) Internal spring clip allows

optimized room size coverage.

• Alarm memory After an alarm and until power is cycled,

the alarm memory can be checked with the hand-clap test.

• LED indicator Red LED provides detector test and

status indication.

• Tamper resistant Provides a screw that secures the cover

to the base to prevent tampering.

• Hand-clap test In addition to a test mode, you can test the

detector by clapping your hands.

• Optional tamper switch Sends a signal to the control

panel when the cover is removed from the base.

What You Will Need

You need the following tools and parts to install the detector:

• ShatterPro 3 detector including screw to secure the cover

to the base

• Screws and wall anchors

• Flat-blade screwdriver

• Phillips screwdriver

• Sentrol 5709C hand-held tester

Selecting a Location for the Detector

The detector can be mounted on ceilings or on walls opposite

or adjacent the window to be protected. See Figure 2.

Use the following guidelines to determine the best location to

install the detector.

• Mount at least 3 feet (1 m) from glass windows

being protected.

• Windows must be at least 12 x 24 inches

(30.5 x 61 cm) square.

• Avoid locations where lined, insulating, or sound deaden-

ing drapes are used.

• Mount 12 inches (30.5 cm) away from wall corners.

• Avoid locations where interior closed wooden shutters are

used.

• Locate in a suitable envionment as follows:

- Temperature between 32° and 122°F (0° and 50°C)

- Humidity between 10 and 90% non-condensing

• Mount the detector on a stable surface up to 25 feet (7.6 m)

from the farthest point on the glass surface. See Figure 2.

• Avoid locations that expose the detector to possible false

alarm sources such as:

- Glass airlocks and vestibule areas

- Kitchens

- Residential car garages

- Small utility rooms

- Stairwells

- Bathrooms

- Small acoustically live rooms

- Air vents

Figure 1 - ShatterPro 3 Housings

Figure 2 - Mounting Locations

Ceiling

mount

Wall

mount

25' (7.6 m)

max.

25' (7.6 m)

max.



1 2 3 4

Inhaltsverzeichnis

Seite 1 - Glassbreak Detector

1ShatterPro 3 Glassbreak DetectorShatterPro 3Glassbreak DetectorInstallation InstructionsDescriptionThe ShatterPro 3 is an acoustic glassbreak det

Seite 2 - Installing the Detector

2ShatterPro 3 Glassbreak DetectorSelecting the Best Location forMultiple Window CoverageThe detector has a 360° coverage pattern that can be used toco

Seite 3 - Testing the Detector

3ShatterPro 3 Glassbreak DetectorTesting the DetectorTo verify detector range and operation, you need the Sentrol5709C hand-held tester.Use the follow

Seite 4 - 1030856 Rev D 12/00

4ShatterPro 3 Glassbreak DetectorrebmuNledoM noitpircseDTN2185AmroF,gnisuohralugnatcerhtiw3orPrettahSTN2185RAmroF,gnisuohdnuorhtiw3orPrettahSTN5185 hc