Interlogix Simon XT Installation Manual Bedienungsanleitung PDF herunterladen (Seite 32)

26 Simon XT Installation Manual

3. Disconnect the green and red premises phone jack wires from the Telco block

D and splice them C to the four-conductor cable A black and white (or yellow)

wires. Use weatherproof wire connectors for these splices.

4. Connect the four-conductor cable A green and red wires to the Telco block D

TIP (+) and red to RING (–) posts.

5. Connect the phone cord E included with the panel to the RJ31X B and the

panel LINE jack.

Figure 8: Full line seizure wiring with RJ-31X

Full line seizure wiring with one premises phone

If a single phone is all that exists on the premises, full line seizure can be

accomplished without an RJ31X (Figure 8 above).

1. Disconnect the phone from the premises phone jack and plug it into the panel

PHONE jack A. This jack is disconnected automatically whenever the panel

reports.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 73 74

Keine Kommentare

Interlogix Simon XT Installation Manual Bedienungsanleitung Seite 32