Interlogix NX-488 Bedienungsanleitung PDF herunterladen

ITI Part Number 60-873-95

Sentrol/Caddx Part Number NX-488

Document Number 466-1841 Rev B

April 2001

Product Summary

The ShatterPro

omnidirectional glassbreak sensor

provides 360 degree coverage. It can be mounted on the

ceiling, or on the opposite wall, or on adjoining walls. It

has a range of up to 20 feet for glass panes 1 x 2 (0.3m x

0.6 m) or larger.

Figure 1. The ShatterPro Glass Break Sensor

The maximum detection range is 20 (6 m) for plate,

tempered, laminated and wired glass. For armor-coated

glass, the maximum detection range is 12 (3.65 m).

Coverage is measured from the sensor to the point on the

glass farthest from the sensor (see D and D in Figure 2).

See Specifications for recommended glass thickness.

Figure 2. Optimum performance zone

Not

ShatterPro may not consistently detect cracks in

glass, or bullets that break through the glass.

Glassbreak sensors should always be backed up

by interior protection.

Installation Guidelines

❑ For best detection, avoid installing in rooms with

lined, insulating, or sound deadening drapes or rooms

with closed wooden window shutters inside.

❑ Dont use near an air compressor. A blast of

compressed air may cause a false alarm.

❑ Avoid stairwells, glass booths, and all rooms smaller

that 10 x 10 (3 m x 3 m).

❑ The Pattern Recognition Technology of the

ShatterPro ignores most false alarm sounds. Some

sounds can duplicate the glass break pattern the

ShatterPro detects, however, so the ShatterPro works

best in rooms with only moderate noise. Avoid rooms

where white noise, such as a fan, is present. Avoid

rooms with noisy areas or multiple noise sources such

as small kitchens or bathrooms, garages, etc.

Not

For glass break protection in these applications

(where ShatterPro is not appropriate), use shock

sensors on the windows or window frames.

❑ Avoid adding (learning) the sensor into 24-hour sensor

groups, where the sensor will be armed even when the

room is in use. Like a motion detector, a glass break

sensor may be tripped when occupants are in the

protected area. Adding the ShatterPro to a perimeter

sensor group, which is armed only when the perimeter

doors and windows are armed, will help prevent false

alarms.

❑ Do not install in humid rooms. The ShatterPro is not

hermetically sealed. Excess moisture on the circuit

board can eventually cause an electrical short and

possibly a false alarm.

❑ The sensor can be mounted as close as 3.3 (1 m) from

the glass.

Tools Needed

❑ Phillips screwdriver

❑ Sentrol 5709C hand-held tester

is distance from glass

The optimum performance zone

is distance D in either direction

on the glass.

D' 20'

Wireless ShatterPro

Maximum distance (D) from

the ShatterPro to the glass

must not exceed 20'

4.24"

10.8 cm

1.70"

4.3 cm

3.13"

8.0 cm

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Tools Needed

®ITI Part Number 60-873-95Sentrol/Caddx Part Number NX-488Document Number 466-1841 Rev BApril 2001Product SummaryThe ShatterPro® omnidirectional glass

Seite 2 - Testing the ShatterPro

2InstallationUse the following procedure to install the ShatterPro.1. Choose a mounting location. Since the sound ofbreaking glass travels straight ou

Seite 3 - Testing the System

3The ShatterPro is designed to detect the breaking offramed glass mounted in an outside wall. Testing thesensor with unframed glass, such as broken bo

Seite 4 - Specifications

4SpecificationsCompatibility All ITI 319.5 MHz Learn Modepanels; All Caddx 319.5 MHzpanelsHousing material: Flame retardant ABSDimensions: 4.24 (10.

Verwandte Modelle: 60-873-95

Kommentare zu diesen Handbüchern

Keine Kommentare

Interlogix NX-488 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Interlogix NX-488 herunter. Interlogix NX-488 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 60-873-95

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Interlogix NX-488